We are pleased to annouce the return of the EWS Summer Edition event, to be held on the 5th and 6th of September 2020 at the Colchester Model Car Club in Essex.
The event will run to simple rules across three classes: * MODIFIED TOURING * SUPER STOCK TOURING * FRONT WHEEL DRIVE
---- SCHEDULE ---- Saturday 5 September - Practice in groups from 11am until 7pm Sunday 6 September - Gates open 7:30am. Practice, Qualifying and Finals, finishing around 5pm. Exact format depends on final number of entries.
---- ENTRIES ---- Entries can be made using the following links. Please note you need to enter Saturday separately if you wish to attend the practice day too! Saturday practice is £10 per entry, Sunday is £40 per entry, including one set of marked controlled tyres.
---- TYRES ---- Modified and Super Stock Touring - BRCA Sweep EXP-34R2PG-BRCA. One marked set included in your entry. You may use a second set, but these MUST be pre-ordered and purchased from us with your entry. You can use any tyres for Practice. Front Wheel Drive - Matrix EP Rubber Asphalt. One marked set included in your entry. Only this one set may be used for Qualifying and Finals. You can use any tyres for Practice.
---- ADDITIVE ---- We ask all competitors in all classes to use the MR33 V3 (Red) additive for all rounds. This will help keep traction levels consistent for everyone and the racing fair and easy. You can get this additive from Tonisport here.
---- RULES ---- - Modified Touring Basic EWS construction rules. Any commercially available motor and ESC. Any commercially available Touring Car bodyshell with wings cut our and mounted as intended by the manufacturer. 1320g minimum weight.
- Super Stock Touring Basic EWS construction rules. 13.5 turn motors from current BRCA list. ESC in 'blinky mode'/zero timing only. Any commercially available Touring Car bodyshell with wings cut our and mounted as intended by the manufacturer. 1320g minimum weight.
- Front Wheel Drive Basic EWS construction rules. 17.5 turn Hobbywing/EWS Handout motors. ESC in 'blinky mode'/zero timing only. Maximum earing of 4.5. Bodyshells as per BRCA/EWS approved list, with wings only as included with the bodyshell, cut out and mounted as intended. 1250g minimum weight.
- LiPo Batteries and Charging Any commercially available, hard-cased 7.4 or 7.6v 2S LiPo battery can be used. Voltage must not exceed 8.40v at any time. All batteries must be charged on a correct LiPo setting at a maximum of the manufacturers recommendations, or 20A (whichever is the lower). Batteries must be in a LiPo sack when charging.
---- COVID-19 RULES AND RESTRICTIONS ---- This event will take place under the current reccomendations of the BRCA with respect to COVID-19 restrictions. At present, this means: * If you feel ill, particularly suffering any of the published symptoms of COVID-19, you must not attend the event. * If you begin to feel unwell whilst at the race, you should leave as quickly as possible. * A maximum of two households per gazebo. * Face masks must be worn when not in your own gazebo and 2 meter social distancing cannot be maintained. * You must provide your own hi-vis jacket and suitable work gloves (not latex) for marshalling. * All competitors should provide their own hand sanitiser and use it regularly. * You must follow any one-way systems at the track, (setting down cars and the queue for the drivers stand, etc) * All results will be published online (no paper copies at the track).
These rules are subject to change, and final rules will be communicated to drivers ahead of the event.
---- RACING IN THE WET ---- We hope to run a dry event. If it is possible to run all the races in the dry by ammending the timeschedule (eg, delaying the start, pausing for a brief period, or finishing earlier), we will do so to keep as much racing in the dry as possible.
However, if racing in the wet or rain becomes neccessary, and the organisers announce a "wet race", the following applies: * Any tyre may be used. No tyre additive can be used. * For FWD, any BRCA approved 17.5 turn motor may be used.
If you have any questions, please email the EWS Team: email@example.com